The cutest greenhouse on the block! This charming little greenhouse is sized just right for a small family. Well thought out plans are optimized for minimal cutting and material waste. Fits most standard 36″ wide screen or storm doors.
Watch us build it in this video tutorial:
https://www.youtube.com/embed/PBKhLqgjkrw
Plans do not include the customizations made in photos: Vent, raised beds, interior finish; Plans are designed to work with standard corrugated plastic panels with 24″ wide coverage, but panels may vary, so always check with manufacturer install guides.
Recommended Tools | Miter Saw, Circular Saw, Drill, Brad Nailer, Ladder, Level, Measuring Tape, Speed Square, Personal Safety Equipment |
Materials | 2x Framing, Standard off the shelf corrugated plastic greenhouse panels, T1-11 siding, screws and brad nails |
License | Personal Use Only - Not for resale |
File Types | 17 Page PDF with printable shopping and cut list, detailed diagrams |
Could you please send/download a copy of greenhouse plans to my email. wjsadowski405@gmail.com
My computer crashed and I no longer have access to the plans. When I receive the plans this time I will place them on a USB stick to avoid this happening again.
Thank you,
Wayne Sadowski
I have been trying to buy plans, anna white, small gable greenhouse… submitted credit cards three times, another credit card, nothing;
Now I am worried I bought three plans?? or no plans???
Please let me know.
I have signed up with paypal, have not used it before, but for this purchase.
Ken Ullman
22sunny2@gmail.com
541-550-6453
Hi Ana, we are so excited to get building this, as soon as the snow melts from our yard! We’re sitting down and planning our shopping list and thinking of how we’d set the space up. I was wondering if the roof panels overlapped at all? The math seems to work out that there wasn’t any overlap and it didn’t look like there was in the video you shared. Thanks!
Do you have a ballpark price on what the finish greenhouse cost. I am on tight budget don’t want to buy plans if it cost thousands to build. Thank you so much
Hello, was curious about the snow-load on this shed? As I’m in South Dakota and we get a ton of snow . Don’t want to spend the $$$ if this could potentially cave in. Already bought plans…but curious if I need to make adjustments
Never mind. I found the plans. No directions on how to obtain them though. Finally searched through my account and found the download.
I purchased these plans today but have not received any emails with the pdf. I have checked my spam folder. Please send to mszafnicki@gow.org.
thank you.
Unable to download both plans I purchased can you send them again. gordjoynson1@gmail.com
Thanks so much for your purchase, Gord! Plans are automatically sent to the email used on the transaction, but can sometimes end up in the spam folder. We just resent them, so please let us know if you still aren’t able to access them. Thanks again!
Somehow I can’t bring this pdf file up on my email . Could you send it again suellenk2012@gmail.Com
Hi, I am struggling to find any email with the plans. I checked my spam and everything and cannot find it. Could you send it again?
Thanks
Hi Cait,
Thank you for your purchase and for supporting our vendors on Spruc’d! The plans are automatically sent to the email used on the transaction, but can sometimes end up in the spam folder. I just resent the plans, so please let me know if you’re still unable to access them. Thanks again!
How do I print my plans
Thanks for the question, Anthony! The plan will come to you as a PDF file and you should be able to print from there. Hope that helps!
The plans allow for the side walls to be increased in height by 4 inches to accommodate a 36 inch metal panel laid horizontally. Unfortunately, it wasn’t mentioned in the plans and I didn’t catch it that the door studs need to be increased in height as well. These should be reflected as a side note in the plans.
Hi, I ran into the same problem, but I think my door studs should have been cut shorter
When I put up my front wall rafters, they were 3.5 inch too short. If I just cut the door studs shorter, will that fix the problem? Th am you
Unable to download plan clicking link provided. Can I provide you with another email and resend?
Let me know. Thanks
Hi Rex,
Thanks so much for your purchase and for supporting our vendors on Spruc’d! I just resent the plans – please check your spam folder if you don’t see it! Thanks again!
Do you have the plans for a 10 x 12 version of this A frame greenhouse? Love the design but need a bit more room. Hopefully you will but if not I’ll have to do on my own. Love your work and thank you.
I am reading other comments from last year w/o an answer. I want to make sure before I buy that i will get support if needed. Is this site monitored? Thanks!
Hi Andy,
Yes, this is site is updated daily. If you have questions regarding a specific plan, it’s best to reach out to the vendor individually. Thanks!
Not really. She makes plans, then numerous issues or errors our found and she will sometimes mention it in her youtubes but she does not always go back to edit and update plans or notify people of the wrong info in her plans.
Hi Josh,
Thanks for your input! Which numerous issues and errors are you referring to? Can you please specify? Ana is quick to address any discrepancies once she’s aware of it, especially with paid plans. Thanks again!
Well one issue she should address is the fact that there are no roof vents ….. thus an oven.
On the back wall, the video shows two studs on one end about 2″ apart. What is this for? Thanks. I am building a 10x 24′ version with plastic panels on the side on hihges to open for venting in very hot Texas summer. Thanks Walt
What is the finished size of this greenhouse and can it easily be adapted to make a storage shed?
About how much did total material cost for this project
I purchased this plan on April 23, 2021; however the pdf file did not download. How can I download without having to pay again? Thanks
Hi Linda,
Thank you for your purchase and for supporting our Spruc’d vendors! Plans are automatically sent via email on file, but can sometimes end up in the spam folder. I just manually re-sent them; please let me know if you’re still unable to access the plans. Thanks again!
We adjusted our own plans. We added 4 feet to the length and added (built two) of the same ends with screen doors for walk through and sliding windows for ventilation.
Hi Jeff, would you mind sharing how you built the windows for ventilation? We have the frame built, but not exactly sure how to build a window for ventilation. I would be happy to pay you for a simple plan we can follow. Thank you for the consideration!