About the Plan

This plan makes a unit which is 66 ¾ inches tall, 39 ½ inches wide and 18 ½ inches deep.  It was custom made for some friends to fit the space available they had.

On the unit I built I used solid planks for the sides rather than plywood.  For ease of build though I have done these plans using plywood.

For the 1 by 4 planks I used the more expensive Select pine boards except for the molding spacers which were No2 whitewood grade.

I have tried to ensure all steps are covered in these plans but if you find any errors in the plans or have a question then please email me at info@andrewharriswoodwork.com to let me know.

All my builds are made with pocket hole joinery.  You will need a pocket hole jig tool such as a Kreg Pocket Hole Jig in order to build them.


Shopping list from the plan is shown below so you can work out the cost before you buy the plan.