This plan makes a unit which is 66 ¾ inches tall, 39 ½ inches wide and 18 ½ inches deep. It was custom made for some friends to fit the space available they had.
On the unit I built I used solid planks for the sides rather than plywood. For ease of build though I have done these plans using plywood.
For the 1 by 4 planks I used the more expensive Select pine boards except for the molding spacers which were No2 whitewood grade.
I have tried to ensure all steps are covered in these plans but if you find any errors in the plans or have a question then please email me at firstname.lastname@example.org to let me know.
All my builds are made with pocket hole joinery. You will need a pocket hole jig tool such as a Kreg Pocket Hole Jig in order to build them.
Shopping list from the plan is shown below so you can work out the cost before you buy the plan.
|Recommended Tools||Table Saw or Circular Saw, Miter Saw, Kreg Pocket Hole Jigs.|
|License||Personal Use only. Cannot be transferred.|