About the Plan

This plan makes a unit which is 66 ¾ inches tall, 39 ½ inches wide and 18 ½ inches deep.  It was custom made for some friends to fit the space available they had.

On the unit I built I used solid planks for the sides rather than plywood.  For ease of build though I have done these plans using plywood.

For the 1 by 4 planks I used the more expensive Select pine boards except for the molding spacers which were No2 whitewood grade.

I have tried to ensure all steps are covered in these plans but if you find any errors in the plans or have a question then please email me at info@andrewharriswoodwork.com to let me know.

All my builds are made with pocket hole joinery.  You will need a pocket hole jig tool such as a Kreg Pocket Hole Jig in order to build them.

 

Shopping list from the plan is shown below so you can work out the cost before you buy the plan.  

 

Materials
License Personal Use only. Cannot be transferred.
File Types PDF